Qnubu Pres Pro-Rot Hydraulic 10 Tons (Plate 12x12cm)
Qnubu Pres Pro-Rot Hydraulic 10 Tons (Plate 12x12cm)
Qnubu Pres Pro-Rot Hydraulic 10 Tons (Plate 12x12cm)
Qnubu Pres Pro-Rot Hydraulic 10 Tons (Plate 12x12cm)
Qnubu Pres Pro-Rot Hydraulic 10 Tons (Plate 12x12cm)
Qnubu Pres Pro-Rot Hydraulic 10 Tons (Plate 12x12cm)
Qnubu Pres Pro-Rot Hydraulic 10 Tons (Plate 12x12cm)
Qnubu Pres Pro-Rot Hydraulic 10 Tons (Plate 12x12cm)

Press

Qnubu Pres Pro-Rot Hydraulic 10 Tons (Plate 12x12cm)

The Qnubu Press Pro-Rot 10 T press, now equipped with a high-precision pressure gauge, takes your medicinal extractions to the next level. A compact press, with a pressure capacity of 10,000 Kg. Ideal for large and medium producers of medicinal extractions using the Rosin technique.

Fact sheet

REF: PREN0042

With a robust and compact design, the Qnubu Press Pro-Rot 10 T is perfect for extraction producers medicinals of all sizes. It has an ergonomic handle on the top to be easily transportable, allowing you to carry out your extractions wherever necessary.

By combining pressure and temperature, this press guarantees the efficient extraction of resins and oils essentials from your favorite plant materials, all without the use of dangerous chemical solvents. With the manometer integrated pressure gauge, you can accurately monitor the applied pressure level in real time, ensuring consistent results in each extraction.

The process is simple: connect the press to the electrical network, adjust the pressure, temperature and time parameters desired, and place your plant material between the plates. Then activate the pressure crank and timer, and the press will do the rest. Once the timer reaches zero, the press will beep to indicate that the extraction is ready.

With additional features such as dual temperature control, an adjustable timer from 0 to 999 seconds and a 220V EU plug, this press offers a convenient and safe removal experience. Also has CE certification, guaranteeing its quality and compliance with safety standards.

How to use:

  • 1. Connect to the mains and press the power button.
  • 2. Set the desired pressure, temperature and time parameters
  • 3. Wait for the thermostat to reach the set temperature value.
  • 4. Place the properly packaged plant material between the plates.
  • 5. Operate the pressure crank and activate the countdown button.
  • 6. The press will beep when the countdown ends.
  • 7. To release the pressure on the plates, turn the pressure valve counterclockwise. The system Hydraulic will release the pressure and the plates will open automatically.

Features

  • Manual operation
  • Plug and Play System: Plug and Play
  • Pressure: 10000KG - 10 TON-
  • Manometer (bar/psi) Yes
  • Plate Size: 12 x 12 cm
  • Double temperature control (0-250 ºC)
  • Timer 0-999 sec. Acoustic warning
  • 220V European plug
  • Consumption: 1400 W/h
  • Weight: 40 Kg.
  • Dimensions: 33 x 34 x 59 cm (Length, Width, Height)
  • Current: 6.5 A